Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.

EXAMPLE 30 A solution of rhodanine-3-carbamoylsulphonyl chloride which is obtained if a solution of 3.11 g of 3-aminorhodanine in 50 ml of acetonitrile is added to a solution of 1.8 ml of chlorosulphonylisocyanate in 50 ml acetonitrile and the mixture is stirred for 40 minutes at 25 C, is reacted, analogously to Example 5, with a silyl ester solution as in Example 5 (approx. 1.5 mmols of silyl ester), and worked up. The resulting crude product, in acetone solution, is decolourised with active charcoal and then converted by means of sodium alpha-ethylhexanoate into the sodium salt of 6-[D-alpha-(rhodanine-3-carbamylsulphamylamino)-phenylacetamido]-penicillanic acid. In a thin layer chromatogram on silica gel, Rf52 = 0.56; Rf96 = 0.76; Rf100 = 0.20; Rf110 = 0.28. [alpha]D20 = + 110 +- 1 (c = 1 in 0.5 N NaHCO3).

1438-16-0, As the paragraph descriping shows that 1438-16-0 is playing an increasingly important role.

Reference£º
Patent; Ciba-Geigy Corporation; US3996208; (1976); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,2-Cyanoimino-1,3-thiazolidine,26364-65-8,Molecular formula: C4H5N3S,mainly used in chemical industry, its synthesis route is as follows.,26364-65-8

250mL three-necked flask cyanoimino-1,3-thiazolidine 3.4 g (0.0265mol), and treated with 150 mL of acetonitrile was stirred, after dissolved with K2CO3 3.7g (0.0265mol), a solution of 5.3 g (0.0265 mol) of diethoxy thiophosphoryl chloride (94%) in 50 mL of acetonitrile was slowly added dropwise, 15 min within the drop is completed, heating to 45C for 13 h. After completion of the reaction, the filtrate was concentrated to give a yellow oil which was passed through a silica gel column (V petroleum ether: V ethyl acetate = 7: 3). Recrystallization from ethyl acetate gave a colorless transparent crystal L090813. Melting point 49.2-51.5 C, yield 76.9%.

With the synthetic route has been constantly updated, we look forward to future research findings about 2-Cyanoimino-1,3-thiazolidine,belong thiazolidine compound

Reference£º
Patent; Qingdao Agricultural University; Sun, Jialong; (11 pag.)CN103554176; (2016); B;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,1,1-Dioxo-isothiazolidine,5908-62-3,Molecular formula: C3H7NO2S,mainly used in chemical industry, its synthesis route is as follows.,5908-62-3

Procedure E; [00215] To a sealed tube containing CuI (8mg, 0.039mmol), K2CO3 (0.2 Ig, 1.54 mmol) and (IS, 25)-cyclohexane-l,2-diamine (9mg, 0.077 mmol) under a N2 atmosphere was added a solution of 5-bromo-2-(naphthalene-2-yl)benzo[d]oxazole (0.25g, 0.77 mmol) in anhydrous toluene (2.5 mL), followed by a solution of isothiazolide-l,2-dioxide (0.12g, 0.96 mmol) in anhydrous toluene (2.5 mL). The resulting reaction mixture was heated to HO0C for 12h, cooled to room temperature, filtered over celite and concentrated under reduced pressure. The residue was purified by column chromatography eluting with petroleum ether/EtOAc (1/0 to 0/1, v/v), followed by a crystallisation from industrial methylated spirits to give 30mg (11%) of 5-(isothiazolidin-dioxide-2-yl)-2-(naphthalene-2-yl)benzo[d]oxazole. LCMS RT = 2.24 min, M+H+ 364.8. 1H NMR (D6-DMSO): 8.84 (IH, br s), 8.26 (IH, dd, J 1.6 &; 8.6), 8.20- 8.13 (2H, m), 8.06-8.03 (IH, m), 7.85 (IH, d, J 8.8), 7.70-7.63 (3H, m), 7.38 (IH, dd, J2.3 &; 8.9), 3.84 (2H, t, J6.5), 3.55 (2H, t, J7.3), 2.45 (2H, m).

With the synthetic route has been constantly updated, we look forward to future research findings about 1,1-Dioxo-isothiazolidine,belong thiazolidine compound

Reference£º
Patent; BioMarin IGA, Ltd.; WREN, Stephen, Paul; WYNNE, Graham, Michael; WILSON, Francis, Xavier; POIGNANT, Severine, Danielle; WO2010/112093; (2010); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,3-Aminorhodanine,1438-16-0,Molecular formula: C3H4N2OS2,mainly used in chemical industry, its synthesis route is as follows.,1438-16-0

General procedure: A mixture of aminorhodanine (1 mmol), isatin (1 mmol) and 5 muL of acetic acid in 2mL of distilled ethanol was placed in a cylindrical quartz reactor (Phi = 4 cm). The reactor was introducedinto a monomode microwave (Anton Paar) apparatus, for 5 min at100 C and 50 Watts. The crude reaction mixture was allowed tocool down at room temperature and ethanol (10 mL) or mixture of H2O/EtOH (10 mL) was directly added in the cylindrical quartzreactor. The resulting precipitated product was filtered off and waspurified by recrystallization from ethanol if necessary.

With the synthetic route has been constantly updated, we look forward to future research findings about 3-Aminorhodanine,belong thiazolidine compound

Reference£º
Article; Khaldoun, Khadidja; Safer, Abdelmounaim; Boukabcha, Nourdine; Dege, Necmi; Ruchaud, Sandrine; Souab, Mohamed; Bach, Stephane; Chouaih, Abdelkader; Saidi-Besbes, Salima; Journal of Molecular Structure; vol. 1192; (2019); p. 82 – 90;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,Thiazolidin-2-one,2682-49-7,Molecular formula: C3H5NOS,mainly used in chemical industry, its synthesis route is as follows.,2682-49-7

Example 5 Preparation of 3-(2-nitrophenylmethyl)-2-thiazolidinone A mixture containing 3.09 g (0.03 mol) of 2-thiazolidinone, 11.2 g of potassium carbonate, 1.8 g of potassium hydrogen carbonate, 0.5 ml of water, 30 ml of methyl isobutyl ketone and 6.5 g (0.03 mol) of 2-nitrobenzyl bromide is refluxed for 6 hours, then cooled down and thoroughly mixed with 50 ml of water. The mixture is filterred and the clear filtrate is separated. The organic phase is washed with 10 ml of water, dried and evaporated. The oily residue is recrystallized from ethanol to give 2.65 g (37.0%) of the title compound, m.p.: 92-93 C. IR (KBr): 1670 cmmin1 (C=O) 1525, 1345 cmmin1 (NO2) 1H-NMR (CDCl3): 3.1-3.8 ppm (m, 4H, 2CH2) 4.9 ppm (s, 2H,CH2) 7.2-8.3 ppm (m, 4H, ArH).

With the synthetic route has been constantly updated, we look forward to future research findings about Thiazolidin-2-one,belong thiazolidine compound

Reference£º
Patent; RICHTER GEDEON VEGYESZETI GYAR R.T.; EP320910; (1989); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,3-Aminorhodanine,1438-16-0,Molecular formula: C3H4N2OS2,mainly used in chemical industry, its synthesis route is as follows.,1438-16-0

Procedure A. To a solution of 1H-indole-3-carbaldehyde (3h,489.7 mg, 3.37 mmol) in ethanol (10 mL) was added slowly to the solutionof 3-amino-2-thioxothiazolidin-4-one (2, 250 mg, 1.69 mmol) inethanol and was added to acetic acid (2 drops) as a catalyst. The reactionmixture was refluxed overnight, and the mixture was cooled toroom temperature. The red product formed was recrystallized fromethanol, filtered, and dried in vacuo. Compound 4 (286 mg, 42%) wasobtained as red solid after recrystallization.

With the synthetic route has been constantly updated, we look forward to future research findings about 3-Aminorhodanine,belong thiazolidine compound

Reference£º
Article; Bayindir; Caglayan, Cuneyt; Karaman, Muhammet; Guelcin, ?lhami; Bioorganic Chemistry; vol. 90; (2019);,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,5908-62-3

To a stirred solution of 3-bromo-9-fluoro-6-methanesulfonyl-5H-pyrido[3,2- bjindole (200 mg, 0.583 mmol) and isothiazolidine-l,l-dione (278 mg, 2.30 mmol) in NMP (2.40 mL) was added t-BuOK (203 mg, 1.81 mmol). This mixture was heated at 115 C for 11 h and cooled to room temperature. The mixture was diluted with EtOAc (20 mL) and 10% aq. LiCl solution (20 mL). Some insoluble solid was filtered to give the desired product, 2-(3-bromo-6-(methylsulfonyl)-5H-pyrido[3,2-b]indol-9- yl)isothiazolidine-l,l-dione (115 mg, 44%). NMR (400MHz, DMSO-de) delta 11.94 (br s, 1H), 8.72 (br s, 1H), 8.32 (br s, 1H), 8.04 (br d, J=7.6 Hz, 1H), 7.55 (br s, 1H), 4.22 (br s, 2H), 3.59 (br s, 2H), 3.39 (br s, 3H), 2.61 (br s, 2H). HPLC: RT=2.055 min (Chromolith ODS 4.6 x 50 mm (4 min grad) eluting with 10-90% aqueous MeOH over 4 min containing 0.1 % TFA, 4 mL/min, monitoring at 220 nm); MS (ES): m/z= 444,1 ; 445.9 (Br pattern) [M+H]+.

As the paragraph descriping shows that 5908-62-3 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; HAN, Wen-Ching; DEGNAN, Andrew P.; DESKUS, Jeffrey A.; GAVAI, Ashvinikumar V.; GILL, Patrice; SCHMITZ, William D.; STARRETT, John E., Jr.; (193 pag.)WO2016/183115; (2016); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.

General procedure: Two indole groups, 1H-indole-3-carbaldehyde (1) and 5-Bromo-1H-indole-3-carbaldehyde (2) (Sigma-Aldrich) were used as the primary core for insertion of the substituents 3-amino-2-thioxo-thiazolidin-4-one, 2-thioxo-thiazolidin-4-one, thiazolidin-2,4-dione and 2-thioxo-imidazolidin-4-one. The substituents were obtained commercially, except thiazolidin-2,4-dione that was synthesized in our laboratory according to the methodology of Brown [69].Prior to this reaction process, the groups 3a, 3b, 3c and 3d were solubilized in ethanol in the presence of morpholine and left stirring for 10 minutes at a temperature of 65 C. After this, indole nucleus (1 and 2) was added to the reaction system to obtain the final derivatives. Change of color was observed in all reactions after addition of indoles and precipitate formation 20min later. The reaction was monitored by thin layer chromatography (TLC) to check product formation and termination of the reaction. In general, the reaction lasted about 1h. As the reaction finished, the products were filtered and subjected to purification by successive washing with ethanol. The purity of the products was verified by 1H NMR, 13C NMR, mass spectroscopy and infrared., 1438-16-0

As the paragraph descriping shows that 1438-16-0 is playing an increasingly important role.

Reference£º
Article; Lafayette, Elizabeth Almeida; de Almeida, Sinara Monica Vitalino; Cavalcanti Santos, Renata Virginia; de Oliveira, Jamerson Ferreira; Amorim, Cezar Augusto da Cruz; da Silva, Rosali Maria Ferreira; Pitta, Maira Galdino da Rocha; Pitta, Ivan da Rocha; de Moura, Ricardo Olimpio; de Carvalho Junior, Luiz Bezerra; de Melo Rego, Moacyr Jesus Barreto; de Lima, Maria do Carmo Alves; European Journal of Medicinal Chemistry; vol. 136; (2017); p. 511 – 522;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,(S)-4-Phenylthiazolidine-2-thione,185137-29-5,Molecular formula: C9H9NS2,mainly used in chemical industry, its synthesis route is as follows.,185137-29-5

Add 1000 ml of dichloromethane and 500 ml (3.6 mol) of triethylamine to a 5-liter four-necked flask.Phenylthiooxazolidinone 195g (1mol), propionic acid 80g (1.1mol),Add 1000g (1mol) of 2-chloropyridine p-toluenesulfonic acid methyl salt to 1000mlThe dichloromethane solution was added and stirred at 25 C for 5 hours.TLC showed complete reaction, adding water to extract the reaction, followed by water,Saturated brine, the organic phase was washed with anhydrous sodium sulfate and concentrated.Recrystallization gave 240 g of product with a yield of 95.6%.HPLC purity >99%.

With the synthetic route has been constantly updated, we look forward to future research findings about (S)-4-Phenylthiazolidine-2-thione,belong thiazolidine compound

Reference£º
Patent; Shanghai Lark Pharmaceutical Technology Co., Ltd.; Shen Xin; Yang Jidong; Hu Xiaochuan; Li Feng; (6 pag.)CN109020913; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

As a common heterocyclic compound, it belong thiazolidine compound,3-Aminorhodanine,1438-16-0,Molecular formula: C3H4N2OS2,mainly used in chemical industry, its synthesis route is as follows.,1438-16-0

General procedure: A mixture of aminorhodanine (1 mmol), isatin (1 mmol) and 5 muL of acetic acid in 2mL of distilled ethanol was placed in a cylindrical quartz reactor (Phi = 4 cm). The reactor was introducedinto a monomode microwave (Anton Paar) apparatus, for 5 min at100 C and 50 Watts. The crude reaction mixture was allowed tocool down at room temperature and ethanol (10 mL) or mixture of H2O/EtOH (10 mL) was directly added in the cylindrical quartzreactor. The resulting precipitated product was filtered off and waspurified by recrystallization from ethanol if necessary.

With the synthetic route has been constantly updated, we look forward to future research findings about 3-Aminorhodanine,belong thiazolidine compound

Reference£º
Article; Khaldoun, Khadidja; Safer, Abdelmounaim; Boukabcha, Nourdine; Dege, Necmi; Ruchaud, Sandrine; Souab, Mohamed; Bach, Stephane; Chouaih, Abdelkader; Saidi-Besbes, Salima; Journal of Molecular Structure; vol. 1192; (2019); p. 82 – 90;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com