New learning discoveries about 179087-93-5

The synthetic route of 179087-93-5 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.179087-93-5,2-(4-((2,4-Dioxothiazolidin-5-yl)methyl)phenoxy)acetic acid,as a common compound, the synthetic route is as follows.

Examples (Example 1) 4-[(2,4-Dioxothiazolidin-5-yl)methyl]phenoxyacetyl chloride Thionyl chloride (170 mg, 1.34 mmol) and then pyridine (1 drop) were added to a suspension of 4-[(2,4-dioxothiazolidin-5-yl)methyl]phenoxyacetic acid (220 mg, 0.78 mmol) in dichloromethane (10 ml) at room temperature, and the mixture was refluxed for 3.5 hours. The resulting solution was concentrated under reduced pressure to obtain about 250 mg of the gummy target compound. Nuclear magnetic resonance spectrum (400 MHz, DMSO-d6) delta (ppm): 3.05 (1H, dd, J = 9.0 Hz, J = 14.1 Hz, CH2CH), 3.31 (1H, dd, J = 4.1 Hz, J = 14.1 Hz, CH2CH), 4.64 (2H, s, CH2O), 4.87 (1H, dd, J = 4.1 Hz, J = 9.0 Hz, CH2CH), 6.85 (2H, d, J = 8.6 Hz, aromatic), 7.16 (2H, J = 8.6 Hz, aromatic), 12.02 (1H, s, NH).

The synthetic route of 179087-93-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Daiichi Sankyo Company, Limited; EP1894929; (2008); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Downstream synthetic route of 5908-62-3

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2, 4-Dichloro-5,7-difluoro-3-methylquinoline (800 mg, 3.20 mmol), crude isothiazolidine 1,1-dioxide (390 mg, 3.20 mmol), Pd2(dba)3 (150 mg, 0.16 mmol), (9,9-dimethyl-9H-xanthene-4,5-diyl)bis(diphenylphosphine) (XantPhos) (280 mg, 0.48 mmol) and cesium carbonate (1.50 g, 4.50 mmol) were slurried in 10.0 mL of dry dioxane along with ~1.0 gram of activated 3 A molecular sieves. The reaction was heated in a microwave reactor at 100 C for 2 h. The reaction was then cooled to rt, diluted with EtOAc and DCM and filtered. The filtrate was concentrated and the residue was purifiied by medium pressure chromatography (silica, 0 to 25% EtOAc : hexanes followed by 0 to 20% EtOAc : DCM) to give 2- (4-chloro-5,7-difluoro-3-methylquinolin-2-yl)isothiazolidine 1,1-dioxide. Mass Spectrum (ESI) m/e = 333.1.

The synthetic route of 5908-62-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; AMGEN INC.; DRANSFIELD, Paul, John; GONZALEZ LOPEZ DE TURISO, Felix; KOHN, Todd, J.; PATTAROPONG, Vatee; SIMARD, Jillian, L.; WO2012/3283; (2012); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Downstream synthetic route of 7025-19-6

The synthetic route of 7025-19-6 has been constantly updated, and we look forward to future research findings.

7025-19-6, 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of 5-chloroisatin (182 mg, 1.0 mmol) and N-carboxyethylrhodanine (205 mg, 1.0 mmol) was added DMSO-d6 (3.0 mL). The reaction was followed by proton NMR until the disappearance of the starting material.

The synthetic route of 7025-19-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Xue, Fengtian; MacKerell Jr., Alexander D.; Heinzl, Geoffrey; Hom, Kellie; Tetrahedron Letters; vol. 54; 13; (2013); p. 1700 – 1703;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Downstream synthetic route of 1438-16-0

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

1438-16-0, 3-Aminorhodanine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of aminorhodanine (1 mmol), isatin (1 mmol) and 5 muL of acetic acid in 2mL of distilled ethanol was placed in a cylindrical quartz reactor (Phi = 4 cm). The reactor was introducedinto a monomode microwave (Anton Paar) apparatus, for 5 min at100 C and 50 Watts. The crude reaction mixture was allowed tocool down at room temperature and ethanol (10 mL) or mixture of H2O/EtOH (10 mL) was directly added in the cylindrical quartzreactor. The resulting precipitated product was filtered off and waspurified by recrystallization from ethanol if necessary.

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Khaldoun, Khadidja; Safer, Abdelmounaim; Boukabcha, Nourdine; Dege, Necmi; Ruchaud, Sandrine; Souab, Mohamed; Bach, Stephane; Chouaih, Abdelkader; Saidi-Besbes, Salima; Journal of Molecular Structure; vol. 1192; (2019); p. 82 – 90;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Simple exploration of 5908-62-3

As the paragraph descriping shows that 5908-62-3 is playing an increasingly important role.

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Intermediate 96To an oven dried 50 mL round-bottom flask, methyl 2-bromo-5-methylbenzoate (352 mg, 1.54 mmol), sultam (236 mg, 1.95 mmol), cesium carbonate (732 mg, 2.25 mmol), palladium acetate (40.4 mg, 0.18 mmol), and Xanphos (136 mg, 0.235 mmol) were added and flask was placed under argon. Reagents were suspended in 8 mL of anhydrous dioxane and mixture was heated at 100 C overnight. After cooling to room temperature, reaction mixture was filtered, washing with ethyl acetate. Combined filtrate was concentrated under reduced pressure and resulting film was purified by silica gel column chromatography (25-100% Ethyl Acetate in Hexanes) to yield intermediate 96 (322 mg, 78%) as a yellow off-white solid.1H-NMR (DMSO, 400 MHz): delta 7.75 (d, 1H), 7.44 (m, 1H), 7.35 (m, 1H), 3.89 (s, 3H), 3.81 (t,2H), 3.28 (t, 2H), 2.55 (m, 2H), 2.39 (s, 3H).LCMS m/z [M+H]+ Ci2H15N04S requires: 270.07. Found 270.12.

As the paragraph descriping shows that 5908-62-3 is playing an increasingly important role.

Reference£º
Patent; GILEAD SCIENCES, INC.; BABAOGLU, Kerim; BOOJAMRA, Constantine, G.; EISENBERG, Eugene, J.; HUI, Hon Chung; MACKMAN, Richard, L.; PARRISH, Jay, P.; SANGI, Michael; SAUNDERS, Oliver, L.; SIEGEL, Dustin; SPERANDIO, David; YANG, Hai; WO2011/163518; (2011); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Simple exploration of 7025-19-6

As the paragraph descriping shows that 7025-19-6 is playing an increasingly important role.

7025-19-6, 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A solution of 0.002 mol of rhodanine in 5 mL of ethanol and 0.05 mL of 2-aminoethanol were added to a solution of 0.002 mol of aldehyde 1 in 5 mL of ethanol. The mixture was refluxed for 2-3 h and cooled. The precipitate was filtered off and recrystallized.

As the paragraph descriping shows that 7025-19-6 is playing an increasingly important role.

Reference£º
Article; Sinenko; Slivchuk; Pil?o; Raenko; Brovarets; Russian Journal of General Chemistry; vol. 86; 7; (2016); p. 1597 – 1603; Zh. Obshch. Khim.; vol. 86; 7; (2016); p. 1119 – 1125,7;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Analyzing the synthesis route of 19771-63-2

19771-63-2 (R)-2-Oxothiazolidine-4-carboxylic acid 72390, athiazolidine compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.19771-63-2,(R)-2-Oxothiazolidine-4-carboxylic acid,as a common compound, the synthetic route is as follows.

EXAMPLE 17 (4R)-N-[1-(Nitrooxymethyl)ethyl]-2-oxothiazolidine-4-carboxamide (Compound No. 1-30) A procedure similar to that described in Example 1 was repeated, but using 1.5 g of (4R)-2-oxothiazolidine-4-carboxylic acid and 2.3 g of 1-(nitrooxymethyl)ethylamine nitrate, to obtain 0.35 g of the title compound as colorless crystals, melting at 112-114 C. (after recrystallization from ethanol). Nuclear Magnetic Resonance Spectrum (CDCl3 +hexadeuterated dimethyl sulfoxide) delta ppm: 1.27 (3H, doublet, J=7 Hz); 3.68 (2H, doublet, J=7 Hz);

19771-63-2 (R)-2-Oxothiazolidine-4-carboxylic acid 72390, athiazolidine compound, is more and more widely used in various.

Reference£º
Patent; Sankyo Company, Limited; US5298516; (1994); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Analyzing the synthesis route of 171877-39-7

171877-39-7 (S)-4-Benzylthiazolidine-2-thione 11458470, athiazolidine compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.171877-39-7,(S)-4-Benzylthiazolidine-2-thione,as a common compound, the synthetic route is as follows.

A solution cooled in an ice bath of (S)-4-benzylthiazolidin-2-thione (18.37g, 87.87mmol) in CH2Cl2 (266mL) was treated with Et3N (2 eq) and then with 4-phenylbutanoyl chloride (Intermediate XI.1, 114.23mmol). The resulting mixture was stirred at room temperature for 12 days and then quenched with brine and extracted with CH2Cl2, dried with Na2SO4, filtered and concentrated. Purification by silica gel chromatography using Hex:AcOEt mixtures of increasing polarity (95:5, 9:1, 8:2, 7:3 and 6:4) afforded 24g (70%) of a yellow oil. 13C-NMR (500MHz, CDCl3) delta 201.06, 173.73, 141.53, 136.56, 129.44, 128.88, 128.53, 128.36, 127.19, 125.96, 68.53, 37.93, 36.79, 35.11, 31.90, 26.43.

171877-39-7 (S)-4-Benzylthiazolidine-2-thione 11458470, athiazolidine compound, is more and more widely used in various.

Reference£º
Patent; Universitat Jaume I; EP2168954; (2010); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

New learning discoveries about 1438-16-0

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.

General procedure: A solution in absolute ethanol (30 mL/mmol) of the adequate aldehyde (1 equiv) and hydrazine (1 equiv) was heated under reflux for 5-18 h depending on the reactants. After cooling to room temperature, the precipitated solid was collected by filtration and dried under vacuum to afford the corresponding hydrazone. If no precipitate was observed, the reaction mixture was concentrated under reduced pressure. 4.2.25 (E)-4-(2-(4-Hydroxy-3-methoxybenzylidene)hydrazinyl)-5-thioxodihydrothiophen-3(2H)-one (4g). 30 Yellow solid, yield: 37%, mp: 161.5-163.5 C. IR (neat) numax: 3524, 3343, 1723, 1712, 1615 cm-1. 1H NMR (300 MHz, DMSO-d6) delta: 3.83 (s, 3H); 4.34 (s, 2H); 6.92 (d, J = 8.2 Hz, 1H); 7.31 (dd, J = 1.9, 8.2 Hz, 1H); 7.46 (d, J = 1.9 Hz, 1H); 8.48 (s, 1H); 10.09 (s, 1H). 13C NMR (75 MHz, DMSO-d6) delta: 34.5; 55.5; 110.3; 115.5; 122.9; 124.8; 148.0; 151.7; 169.7; 170.7; 196.6. HRMS (DCI, CH4) m/z calcd for C11H11N2O3S2 [M+H]+: 283.0211, found: 283.0224.

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Vanucci-Bacque, Corinne; Carayon, Chantal; Bernis, Corinne; Camare, Caroline; Negre-Salvayre, Anne; Bedos-Belval, Florence; Baltas, Michel; Bioorganic and Medicinal Chemistry; vol. 22; 15; (2014); p. 4269 – 4276;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Downstream synthetic route of 7025-19-6

The synthetic route of 7025-19-6 has been constantly updated, and we look forward to future research findings.

7025-19-6, 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Raw material A30 and rhodamine molar ratio 1:1.1 is dissolved in ethanol, pyridine is added and reacted at 80 C. for 4 hours. The molar ratio of pyridine to A30 is 1:1. After the reaction was completed, the mixture was cooled to room temperature and a yellow solid precipitated. After suction filtration, the filter cake was washed with dilute hydrochloric acid, washed with water, dried in an infrared light, and then recrystallized from ethanol to obtain a yellow solid with a yield of 81%.

The synthetic route of 7025-19-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Guangdong University of Technology; Du Zhiyun; Li Penghui; Jiang Hong; Zhang Wenjin; Zhao Mincong; Chen Huixiong; Dong Changzhi; Zheng Xi; Zhang Kun; (37 pag.)CN107698577; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com