Category: thiazolidine

7025-19-6, 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,7025-19-6

General procedure: To a mixture of chloroisatin (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 30 min – 12 h, then cooled to room temperature. To the reaction was added water (15 mL). The resulting mixture was sonicated to give an orange -red slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder (71-92%):

As the paragraph descriping shows that 7025-19-6 is playing an increasingly important role.

Reference£º
Patent; MELNICK, Ari; CERCHIETTI, Leandro, Carlos, A.; CARDENAS, Mariano, G.; XUE, Fengtian; MACKERELL, Alexander, D.; WO2014/204859; (2014); A2;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.2682-49-7,Thiazolidin-2-one,as a common compound, the synthetic route is as follows.

b. (N’,N’-Dimethyl-3-aminopropyl)-2-thiazolidinone To a solution of 2-thiazolidinone (4.15 g, 40.18 mmol) in acetonitrile (60 ml) were added potassium carbonate (13.3 g 96.2 mmol), N,N-dimethyl-3-aminopropyl chloride hydrochloride (7.63 g, 48.3 mmol), and 18-crown-6 (catalytic amount). The mixture was refluxed for 18 hours, solvent removed in vacuo, then redissolved in dichloromethane and 1 M potassium chloride (40 ml each). The aqueous phase was isolated and extracted twice with 30 ml portions of dichloromethane. The combined organic fraction was washed with saturated sodium chloride (~50 ml), dried over sodium sulfate, filtered, and dried in vacuo.

2682-49-7, 2682-49-7 Thiazolidin-2-one 97431, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; University of Utah; US6340746; (2002); B1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5908-62-3,1,1-Dioxo-isothiazolidine,as a common compound, the synthetic route is as follows.,5908-62-3

A mixture of 2-(4-bromophenyl)-6-cyclobutyl-5,6,7,8-tetrahydro-4H-[1 ,3]thiazolo[4,5- ofjazepine (may be prepared as described in Example 2) (57.0mg, 0.16mmol), isothiazolidine 1 ,1 -dioxide (38.0mg, 0.31 mmol), cesium carbonate (78.0mg, 0.24mmol), tris(dibenzylideneacetone)dipalladium(0) (7.00mg, 0.00deltammol), and 4,5- bis(diphenylphosphino)-9,9-dimethyl-xanthene (Xantphos) (14.0mg, 0.024mmol) in 1 ,4- dioxane (3ml) was heated under argon at 1060C for 3 hours. The reaction was then cooled to room temperature, diluted with methanol and passed down an ion exchange cartridge (SCX) and washed with methanol and then a 2M ammonia in methanol solution. The basic fractions were then reduced and purified using silica gel chromatography, eluting with a mixture of 2M ammonia in methanol and dichloromethane (1-2.5%) to afford the product (E99); MS (ES+) m/e 404 [M+H]+.

As the paragraph descriping shows that 5908-62-3 is playing an increasingly important role.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2006/97691; (2006); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A common heterocyclic compound, the thiazolidine compound, name is 1,1-Dioxo-isothiazolidine,cas is 5908-62-3, mainly used in chemical industry, its synthesis route is as follows.

5908-62-3, PREPARATION 1 STR61 A mixture of 4-isopropenyl pyridine (1.79 g) and isothiazolidine-1,1-dioxide (1.81 g) was heated at 130 C. during the addition of “Triton B” (Trade Mark, trimethylbenzylammonium hydroxide) (0.25 g added every hour for four hours; 40% solution in water). After stirring for 16 hours at 130 the mixture was cooled and taken in chloroform (50 cm3) and water (50 cm3). The aqueous phase was extracted with chloroform (3*20 cm3) and the dried (MgSO4) extracts were evaporated to given an oil. Chromatography on silica (“Merck 60. 9385”) eluding with ethyl acetate gave 2-[2-(4-pyridyl)prop-1-yl]isothiazolidine-1,1-dioxide which crystallized from ethyl acetate-hexane as needles, m.p. 90-92 (1.01 g). Analysis %: Found: C,55.0; H,6.8; N,12.0. Calculated for C11 H16 N2 O2 S: C,55.0; H,6.7; N,11.7.

As the rapid development of chemical substances, we look forward to future research findings about 5908-62-3

Reference£º
Patent; Pfizer Inc.; US4489075; (1984); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A common heterocyclic compound, the thiazolidine compound, name is 3-Aminorhodanine,cas is 1438-16-0, mainly used in chemical industry, its synthesis route is as follows.

General procedure: O-phenylenediamines (0.065 mol) was heated with N-aminorhodanine (0.065 mol) in xylene (50 ml) for 5 hours. The obtained residue was filtered and was crystallized from aqueous alcohol (charcoal). The obtained solid was recrystallized in ethanol.

1438-16-0, As the rapid development of chemical substances, we look forward to future research findings about 1438-16-0

Reference£º
Article; El Kihel; Ait Sir; Jebbari; Ahbala; Guesmi; Bauchat; Oriental Journal of Chemistry; vol. 32; 4; (2016); p. 1765 – 1768;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.5908-62-3,1,1-Dioxo-isothiazolidine,as a common compound, the synthetic route is as follows.

5908-62-3, To a stirred solution of 5-{9-fluoro-5-[(S)-(4-fluorophenyl)(oxan-4-yl)methyl]-6- methanesulfonyl-5H-pyrido[3,2-b]indol-3-yl}-4-(2H3)methyl-l-methyl-lH-l,2,3-triazole (24.0 mg, 0.0400 mmol) and isothiazolidine-l,l-dione (26.2 mg, 0.220 mmol) in NMP (0.25 mL) was added t-BuOK (19.4 mg, 0.170 mmol). This mixture was heated at 65 C for 2 h and cooled to room temperature. The mixture was then diluted with MeOH and purified via preparative LC/MS with the following conditions: Column: Waters XBridge Phenyl, 19 x 200 mm, 5-muiotaeta particles; Mobile Phase A: 5:95 ACN: water with 10 mM NH4OAc; Mobile Phase B: 95:5 ACN: water with 10 mM NH4OAc; Gradient: 15-70% B over 20 min, then a 5-min hold at 100% B; Flow: 20 mL/min. Fractions containing the desired product were combined and dried via centrifugal evaporation to give 2-{5-[(S)-(4- fluorophenyl)(oxan-4-yl)methyl]-6-methanesulfonyl-3-[4-(2H3)methyl-l -methyl-lH- l,2,3-triazol-5-yl]-5H-pyrido[3,2-b]indol-9-yl} -l 6,2-thiazolidine-l,l-dione (11.6 mg, 40%). NMR (500MHz, DMSO-de) delta 8.73 (s, IH), 8.37 (d, J=8.5 Hz, IH), 7.90 (s, IH), 7.71-7.65 (m, 2H), 7.61 (d, J=8.4 Hz, IH), 7.16 (br t, J=8.7 Hz, 2H), 6.78 (br d, J=10.2 Hz, IH), 4.10 (br t, J=6.8 Hz, 2H), 3.88 (br d, J=10.7 Hz, IH), 3.83 (s, 3H), 3.64 (br d, J=8.7 Hz, IH), 3.57 (br t, J=7.5 Hz, IH), 3.47 (br s, 2H), 3.39 (br s, IH), 3.17 (br t, J=11.4 Hz, IH), 2.66-2.57 (m, 2H), 2.54 (s, 3H), 1.90 (br d, J=12.6 Hz, IH), 1.64 (br t, J=12.1 Hz, 2H), 0.42 (br d, J= 1.8 Hz, IH). LCMS: RT = 1.670 min; (ES): m/z (M+H)+ = 656.15. LCMS: Column: Waters Acquity UPLC BEH C18, 2.1 x 50 mm, 1.7-muetaiota particles; Mobile Phase A: 5:95 ACN:water with 10 mM NH4OAC; Mobile Phase B: 95:5 ACN:water with 10 mM NH4OAc; Temperature: 50 C; Gradient: 0-100% B over 3 min, then a 0.75-min hold at 100% B; Flow: 1.11 mL/min. HPLC Purity at 220 nm: 98 %

As the paragraph descriping shows that 5908-62-3 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; HAN, Wen-Ching; DEGNAN, Andrew P.; DESKUS, Jeffrey A.; GAVAI, Ashvinikumar V.; GILL, Patrice; SCHMITZ, William D.; STARRETT, John E., Jr.; (193 pag.)WO2016/183115; (2016); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.,1438-16-0

RO was synthesized by adding 2.0mMmethenolic solution of 7-(diethylamino)-2-oxo-2H-chromene-3-carbaldehyde to an equimolar methenolic solution of 3-aminorhodanine and refluxing with constant stirring for threehours. A brick red solid was precipitated which was filtered andwashed with diethylether and finally dried under vacuum overanhydrous CaCl2. RO was characterized through various spectroscopictechniques like IR, 1HNMR spectral studies alongwith mass determination through HRMS.Spectroscopic Characterization Data: IR (cm-1): 3182,2973, 2927, 2869, 2852, 1747, 1701, 1614, 1596, 1571, 1516,1421, 1375, 1356, 1293, 1255, 1191, 1163, 1130, 1097, 1030,878, 823, 769, 674; 1HNMR in CDCl3: delta 1.25 (t, 6H, CH3, J =6.9 Hz), 3.46 (q, 4H, CH2, J = 6.7 Hz), 3.792 (s, 3H, OCH3),4.177 (s, 2H, CH2), 6.602 (s, 1H, Ar-H), 6.76 (d, 1H, Ar-H, J =8.4 Hz), 7.42 (d, 1H, Ar-H, J = 8.7 Hz), 8.074, (s, 1H, Ar-H),8.325 (s, 1H, CH=N), 10.157 (s, 1H, NH); HRMS: m/z calculatedfor [C18H21N3O4S2Na]+ = 430.0871; found = 430.0888.

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Kumar, Virendra; Kumar, Ajit; Diwan, Uzra; Singh, Manish Kumar; Upadhyay; Bulletin of the Chemical Society of Japan; vol. 89; 7; (2016); p. 754 – 761;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

7025-19-6,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7025-19-6,3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid,as a common compound, the synthetic route is as follows.

General procedure: A mixture of the appropriate aldehydes (4a-v, 1.0 mmol), the rhodaninemoiety (1.1 mmol), and NaOAc (3.0 mmol) in acetic acid(10 mL) heated to 110 C for 4 h. Then, it was cooled to room temperatureand poured into water (50 mL). The product was then filteredthrough the suction pump, washed with water/EtOH (1/1, v/v) to removethe excess acetic acid and recrystallized from EtOH.

As the paragraph descriping shows that 7025-19-6 is playing an increasingly important role.

Reference£º
Article; Zhang, Wen-Jin; Li, Peng-Hui; Zhao, Min-Cong; Gu, Yao-Hao; Dong, Chang-Zhi; Chen, Hui-Xiong; Du, Zhi-Yun; Bioorganic Chemistry; vol. 88; (2019);,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, 1,1-Dioxo-isothiazolidine is a thiazolidine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5908-62-3, To a solution of 6-(6-fluoro-4-iodo-2-pyridyl)-5-methyl-2-pyrimidin-2-yl-7,8-dihydro-5H- pyrido[4,3-d]pyrimidine (the product of step 1 in Example 96, 100 mg, 223 muiotaetaomicron) in dioxane ( 3mL) was added isothiazolidine-1,1-dioxide (54.1 mg, 446 muiotaetaomicron), cesium carbonate (145 mg, 446 muetaiotaomicron), Xantphos (25.8 mg, 44.6 muetaiotaomicron) and Pd(OAc)2(5.01 mg, 22.3 muetaiotaomicron). After being heated at 100 C with stirring for 20 hrs under argon, the resulting reaction mixture was then filtered and the filtrate was concentrated in vacuo. The residue was purified by prep-HPLC to give 2-[2-fluoro-6-(5-methyl-2-pyrimidin-2-yl-7,8-dihydro-5H-pyrido[4,3-d]pyrimidin-6-yl)-4- pyridyl]-1,2-thiazolidine-1,1-dioxide (8 mg) as a light yellow solid. 1H NMR (400MHz, DMSO- d6) delta ppm: 8.99 (d, 2H), 8.95 (s, 1H), 7.64 (t, 1H), 6.32 (s, 1H), 6.15 (s, 1H), 5.69-5.64 (m, 1H), 4.47-4.36 (m, 1H), 3.89 – 3.79 (m, 2H), 3.68-3.59(m, 2H), 3.54 – 3.43 (m, 1H), 3.14 – 2.98 (m, 2H), 2.42-2.37 (m, 2H), 1.52 (d, 3H). MS obsd (ESI) [(M+H)+]: 442.

5908-62-3 1,1-Dioxo-isothiazolidine 642157, athiazolidine compound, is more and more widely used in various fields.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHENG, Zhanling; HAN, Xingchun; JIANG, Min; WANG, Jianhua; WANG, Yongguang; YANG, Song; (211 pag.)WO2018/1952; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1438-16-0,3-Aminorhodanine,as a common compound, the synthetic route is as follows.,1438-16-0

The obtained 3-chloro-1,2-benzisothiazole 1,1-dioxide (3.77 g) was dissolved in dioxane (20 ml), 3-aminorhodanine (2.77 g) was added thereto, and the mixture was stirred at 110 C. for 1 hr. The reaction mixture was concentrated under reduced pressure, and to the residue was added chloroform (20 ml) to give 3-[(4-oxo-2-thioxothiazolidin-3-yl)amino]-1,2-benzisothiazole 1,1-dioxide (3.56 g).

The synthetic route of 1438-16-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; KNC LABORATORIES CO., LTD.; NATIONAL UNIVERSITY CORPORATION KOBE UNIVERSITY; Kataoka, Tohru; Shima, Fumi; Neya, Masahiro; Sasahara, Daisuke; US2014/194412; (2014); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com