Month: November 2020

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.14446-47-0, name is Thiazolidine hydrochloride. Here is a downstream synthesis route of the compound 14446-47-0. 14446-47-0

Example 3 N-[2-[4-(2,4-Dioxothiazolidin-5-ylmethyl)phenoxyacetylamino]-5-methoxyphenyl]-N-methylcarbamic Acid t-butyl Ester (Exemplification Compound Number 9-8) To a suspension at 0 C. of N-(2-amino-5-methoxyphenyl)-N-methylcarbamic acid t-butyl ester (4.2 g) and 4-(2,4-dioxothiazolidin-5-ylmethyl)phenoxyacetic acid (5.2 g) in methylene chloride (30 ml) was added triethylamine (5.1 ml) and 50% propylphosphonic acid cyclic anhydride in ethyl acetate (12.7 g) and the mixture was stirred at the same temperature for 2 hours. At the end of this time to the reaction mixture was added 5% aqueous sodium hydrogencarbonate solution and the mixture was extracted with methylene chloride. The extract was washed with water and diluted hydrochloric acid and concentrated in vacuo. To the residue was added methanol (40 ml) and the precipitated crystals were filtered to give the title compound (7.3 g, yield 85%). IR spectrum (KBr, nu cm-1): 3323, 1751, 1697, 1534, 1510, 1232, 1153. 1H-NMR spectrum (DMSO-d6, 400 MHz, delta ppm): 1.28(9H, br.s), 3.02(3H, s), 3.07(1H, dd, J=14.0, 9.1 Hz), 3.31(1H, dd, J=14.0, 4.3 Hz), 3.74(3H, s), 4.65(2H, s), 4.87(1H, dd, J=9.1, 4.3 Hz), 6.80-6.95(2H, m), 6.92(2H, d, J=8.5 Hz), 7.19(2H, d, J=8.5 Hz), 7.69(1H, br.s), 8.95(1H, br.s), 12.00(1H, br.s).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-(4-((2,4-Dioxothiazolidin-5-yl)methyl)phenoxy)acetic acid, you can also browse my other articles.

Reference£º
Patent; SANKYO COMPANY, LIMITED; US2003/8907; (2003); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

179087-93-5, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.179087-93-5, name is 2-(4-((2,4-Dioxothiazolidin-5-yl)methyl)phenoxy)acetic acid, below Introduce a new synthetic route.

Step 2-1-(1,1-dioxo-isothiazolidin-2-ylmethyl)-3-benzyl-5-bromo-benzene (8B) A mixture of 8A (5 g, 14.7 mmol), 1,3-propanesultam (3.6 g, 29.7 mmol) and potassium carbonate (4.1 g, 29.7 mmol) in acetonitrile (60 mL) was refluxed overnight. The solvent was removed under reduced pressure. The residue was partitioned between ethyl acetate and brine. The organic phase was dried over sodium sulfate, filtered and concentrated under reduced pressure. The residue was purified by flash chromatograph (ethyl acetate/hexanes) to give 8B as a white solid.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 5908-62-3, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Zhuang, Linghang; Wai, John S.; Payne, Linda S.; Young, Steven D.; Fisher, Thorsten E.; Embrey, Mark W.; Guare, James P..; US2005/10048; (2005); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5908-62-3, name is 1,1-Dioxo-isothiazolidine. Here is a downstream synthesis route of the compound 5908-62-3

Under a nitrogen atmosphere, a solution of 5-bromo-6-chloro-pyridine-2-carboxylic acid methyl ester (Example 9 c, 1 g, 4 mmol), isothiazolidine 1,1-dioxide (730 mg, 06 mmol), copper(I) iodide (150 mg, 0.8 mmol), 1,3-di(pyridin-2-yl)propane-1,3-dione (CAN 10198-89-7, 180 mg, 0.8 mmol) and potassium carbonate (1.1 g, 8 mmol) in DMF (20 mL) was reacted for 24 h at 110 C. The reaction mixture was poured into water, and extracted with ethyl acetate (3¡Á50 mL). The combined organic extracts were washed with water and brine, dried over anhydrous sodium sulfate and evaporated. The residue was purified by column chromatography (silica gel, 4 g, 10% ethyl acetate in petroleum ether) to yield the title compound (0.048 g, 1.6 mmol, 41.4%) as yellow solid; MS (EI): m/e=291.0 [M+H]+.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1,1-Dioxo-isothiazolidine, you can also browse my other articles.

Reference£º
Patent; Bissantz, Caterina; Grether, Uwe; Hebeisen, Paul; Kimbara, Atsushi; Liu, Qingping; Nettekoven, Matthias; Prunotto, Marco; Roever, Stephan; Rogers-Evans, Mark; Schulz-Gasch, Tanja; Ullmer, Christoph; Wang, Zhiwei; Yang, Wulun; US2012/316147; (2012); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5908-62-3, name is 1,1-Dioxo-isothiazolidine. Here is a downstream synthesis route of the compound 5908-62-3

General procedure: To a mixture of aldehyde (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg,1.0 mmol) or 3-(2-(1H-tetrazol-5-yl)ethyl)-2-thioxothiazolidin-4-one (229 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 0.5h – 12h, then cooled to room temperature. To the reaction was added water (15mL). The resulting mixture was sonicated to give yellow-orange slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, you can also browse my other articles.

Reference£º
Article; Liang, Dongdong; Robinson, Elizabeth; Hom, Kellie; Yu, Wenbo; Nguyen, Nam; Li, Yue; Zong, Qianshou; Wilks, Angela; Xue, Fengtian; Bioorganic and Medicinal Chemistry Letters; vol. 28; 6; (2018); p. 1024 – 1029;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6. 7025-19-6

General procedure: Thiazolidin-2-ylidene-cyanamide (0.317 g, 2.50 mmol) inacetonitrile (20 mL) was dropwise added to a stirred solutionof substituted benzyl bromide (2.5 mmol) and 14 mL NaOHaqueous solution (1 M). The mixture is stirred at room temperaturefor 8-10 h. The soild was collected by filtration,washed with n-hexane and dried in vacuo.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-Cyanoimino-1,3-thiazolidine, you can also browse my other articles.

Reference£º
Article; Jia, Ai-Quan; Ma, Sen; Wang, Jun-Ling; Zhang, Qian-Feng; Journal of Chemical Crystallography; (2020);,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.26364-65-8, name is 2-Cyanoimino-1,3-thiazolidine,below Introduce a new synthetic route., 26364-65-8

1,2-thiazolidine 1,1-dioxide (0.03 I g, 0.259 mmol) in dimethylformamide (1 mL) was treated with 60% sodium hydride (0.012g, 0.518 mmol, 0.021 g of a 60% in oil dispersion).The reaction mixture was stirred for 5 mm. To this solution was added Example 41b (0.05 g,0.086 mmol). The reaction mixture was stirred at room temperature for 2 hours. 2 N NaOH (1 mL) was added and the reaction mixture was heated at 65 C for 2 hours. After cooling to room temperature, the reaction mixture was partitioned between water and ethyl acetate. The aqueous layer was extracted with additional ethyl acetate twice. The combined organic layerswere washed with brine, dried over MgSO4, filtered, and concentrated. The residue was purified by preparative HPLC (C18, 10-80% acetonitrile in 0.1% TFA water) to afford 0.025 g (64%) of the title compound. 1H NMR (500 MHz, DMSO-d6) 2.21-2.25 (m, 2H), 3.15 (t, J=6.97 Hz, 2H), 3.23-3.27 (m, 2H), 3.50 (s, 3H), 4.13 (s, 2H), 6.25-6.26 (m, IH), 6.88 (d, J=7.63 Hz, 2H), 7.00 (d, J8.54 Hz, 1H), 7.03-7.05 (m, IH), 7.25-7.30 (m, 4H), 7.34 (dd,J=8.39, 2.29, ZH), 7.48 (d, J=2.44 Hz, 1H), 12.00 (s, 1 H). MS (ESI+) m/z 450.2 (M+H).

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 5908-62-3

Reference£º
Patent; ABBOTT LABORATORIES; ABBOTT LABORATORIES TRADING (SHANGHAI) COMPANY, LTD.; WANG, Le; PRATT, John, K.; MCDANIEL, Keith, F.; WO2013/97052; (2013); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.5908-62-3, name is 1,1-Dioxo-isothiazolidine, below Introduce a new synthetic route.

General procedure: A solution in absolute ethanol (30 mL/mmol) of the adequate aldehyde (1 equiv) and hydrazine (1 equiv) was heated under reflux for 5-18 h depending on the reactants. After cooling to room temperature, the precipitated solid was collected by filtration and dried under vacuum to afford the corresponding hydrazone. If no precipitate was observed, the reaction mixture was concentrated under reduced pressure. 4.2.26 (E)-3-(2-hydroxybenzylideneamino)-2-thioxothiazolidin-4-one (6g). 31 Yellow solid, yield: 52%, mp: 179-180 C. IR (neat) numax: 3038, 1727, 1716, 1615 cm-1. 1H NMR (300 MHz, DMSO-d6) delta: 4.32 (s, 2H); 6.34-7.01 (m, 2H); 7.47 (ddd, J = 1.8, 7.2, 8.3 Hz, 1H); 7.83 (dd, J = 1.7, 7.8 Hz, 1H); 8.96 (s, 1H); 10.68 (s, 1H). 13C NMR (75 MHz, DMSO-d6) delta: 34.6; 116.7; 117.6; 119.6; 128.5; 134.6; 158.6; 167.0; 197.0. HRMS (DCI, CH4) m/z calcd for C10H9N2O2S2 [M+H]+: 253.0105, found: 253.0106.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 3-Aminorhodanine, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Vanucci-Bacque, Corinne; Carayon, Chantal; Bernis, Corinne; Camare, Caroline; Negre-Salvayre, Anne; Bedos-Belval, Florence; Baltas, Michel; Bioorganic and Medicinal Chemistry; vol. 22; 15; (2014); p. 4269 – 4276;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

1438-16-0, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.1438-16-0, name is 3-Aminorhodanine. An updated downstream synthesis route of 1438-16-0 as follows.

EXAMPLE 3 6-Cyano-2,2-dimethyl-3,4-dihydro-trans-4-(2-oxo-3-thiazolidin-1-yl)-2H-benzo[b]-pyran-3-ol (E3) STR10 To a mixture of 6-cyano-3,4-dihydro-2,2-dimethyl-3,4-epoxy-2H-benzo[b]pyran (0.59 g) and 2-oxothiazolidine (0.38 g) stirred in dry dimethyl sulphoxide (30 ml) was added sodium hydride (0.11 g, 80% dispersion in oil). After stirring at room temperature for 6 hours, water (50 ml) was added and the aqueous phase extracted with ethyl acetate. The organic layer was washed with water and brine and dried over magnesium sulphate. Filtration and evaporation gave a gum (0.35 g) which was chromatographed (chromatotron, pentane-ethyl acetate gradient elution, 2 mm silica gel) to give a fraction (105 mg) which was recrystallized from ethyl acetate-pentane to give the title compound (32 mg) as crystals of m.p. 239-240 C. Mass spectrum M+ at m/z 286.0781 Calcd. for C15 H14 N2 O2 S 286.0776.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about Thiazolidin-2-one if you are interested.

Reference£º
Patent; Beecham Group p.l.c.; US4496565; (1985); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

2682-49-7, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.2682-49-7, name is Thiazolidin-2-one. Here is a downstream synthesis route of the compound 2682-49-7

N-t-Butyloxycarbonylglutamine (2.0 g, 8.12 mmol) was dissolved in THF (5 mL) and cooled TO-15C. CAIBE (ISOBUTYLCHLOROFORMATE) (1.06 mL, 8.12 mmol) and 4- METHYLMORPHOLINE (0.895 mL, 8.12 mmol) were added and the solution stirred for 15 min, The formation of the mixed anhydride was checked by TLC (eluent: CHCL3/MEOH : 9/1). After warming to-10C another equivalent of 4-methylmorpholine (0.895 mL, 8.12 mmol) and THIAZOLIDINEHYDROCHLORIDE (1.02 g, 8. 12 mmol) was added. The mixture was brought to room temperature and stirred overnight. The sediment FORMED was filtered off and the solvent was evaporated. The resulting oil was taken up in chloroform (20 ml) and washed with a saturated solution of sodium hydrogensulfate followed by a saturated solution of sodium bicarbonate, water and brine. The organic layer was separated, dried and evaporated. The resulting product was checked for purity by TLC (eluent: CHC13/MEOH : 9/1). Yield: 1.64 g. A portion of this product (640 mg) was dissolved in 3.1 mL ice cold HCl in dioxane (12.98 M, 20 equivalents) and left on ice. The progress of the reaction was monitored by TLC (eluent: CHCL3/MEOH : 9/1). After completion of the reaction the solvent was removed and the resulting residue was taken up in methanol and evaporated again. The resulting oil was dried over phosphorous-V-oxide and triturated twice with diethylether to give the title compound (0.265 g). The purity was checked by HPLC. The identity of the reaction product was checked by NMR analysis.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of Thiazolidine hydrochloride, you can also browse my other articles.

Reference£º
Patent; PROSIDION LTD.; WO2005/20983; (2005); A2;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.14446-47-0, name is Thiazolidine hydrochloride, introduce a new downstream synthesis route. , 14446-47-0

A mixture of 2-(4-bromophenyl)-6-cyclobutyl-5,6,7,8-tetrahydro-4H-[1 ,3]thiazolo[4,5- ofjazepine (may be prepared as described in Example 2) (57.0mg, 0.16mmol), isothiazolidine 1 ,1 -dioxide (38.0mg, 0.31 mmol), cesium carbonate (78.0mg, 0.24mmol), tris(dibenzylideneacetone)dipalladium(0) (7.00mg, 0.00deltammol), and 4,5- bis(diphenylphosphino)-9,9-dimethyl-xanthene (Xantphos) (14.0mg, 0.024mmol) in 1 ,4- dioxane (3ml) was heated under argon at 1060C for 3 hours. The reaction was then cooled to room temperature, diluted with methanol and passed down an ion exchange cartridge (SCX) and washed with methanol and then a 2M ammonia in methanol solution. The basic fractions were then reduced and purified using silica gel chromatography, eluting with a mixture of 2M ammonia in methanol and dichloromethane (1-2.5%) to afford the product (E99); MS (ES+) m/e 404 [M+H]+.

This molecular description is the mechanism of the reaction; it describes how individual atoms, ions, or molecules interact to form particular products.If you are interested, you can also browse other articles of 5908-62-3, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2006/97691; (2006); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com