Month: November 2020

7025-19-6, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. An updated downstream synthesis route of 7025-19-6 as follows.

suspension 01 lsothiazolidme 1,1-dioxide (1.2 equiv.), cesium carbonaie equiv.j, and l-(3-(4-chloro-5-fluoropyrimidin-2-yl)-l-(2-fluorobenzyl)-lH-pyrazol-5-yl)ethanone (Intermediate-IB, 1 equiv) in DMF was stirred at 130 C for 2 h. The solution was diluted with ethyl acetate, and washed with water and brine. The organics were combined, dried over magnesium sulfate, filtered, and the solvent was removed in vacuo. The crude residue was purified via reverse phase HPLC to deliver the desired compound (11 mg, 42.0 % yield) as a white solid. NMR (500 MHz, DMSO-i e) delta ppm 8.80 (d, 1 H), 7.78 (s, 1 H), 7.31 – 7.37 (m, 1 H), 7.20 – 7.26 (m, 1 H), 7.11 (t, 1 H), 6.84 (t, 1 H), 5.85 (s, 2 H), 4.15 (t, 2 H), 3.64 (t, 2 H), 2.59 (s, 3 H), 2.50 (t, 2H).

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 1,1-Dioxo-isothiazolidine if you are interested.

Reference£º
Patent; IRONWOOD PHARMACEUTICALS, INC.; BARDEN, Timothy Claude; SHEPPECK, James Edward; RENNIE, Glen Robert; RENHOWE, Paul Allan; PERL, Nicholas; NAKAI, Takashi; MERMERIAN, Ara; LEE, Thomas Wai-Ho; JUNG, Joon; JIA, James; IYER, Karthik; IYENGAR, Rajesh R.; IM, G-Yoon Jamie; (293 pag.)WO2016/44447; (2016); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

5908-62-3, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.5908-62-3, name is 1,1-Dioxo-isothiazolidine. Here is a downstream synthesis route of the compound 5908-62-3

EXAMPLE 1 Preparation of 3-(2-cyanophenylmethyl)-2-thiazolidinone A mixture containing 3.09 g (0.03 mol) of 2-thiazolidinone, 11.2 g (0.081 mol) of potassium carbonate, 1.8 g (0.018 mol) of potassium hydrogen carbonate, 0.5 ml (0.027 mol) of water and 6.47 g (0.033 mol) of 2-bromomethylbenzonitrile in 30 ml of methyl isobutyl ketone is refluxed for 5 hours, then cooled down. After adding 30 ml of water the mixture is stirred for 30 minutes, the insoluble precipitate is filtered off, washed twice with 10 ml of water each and dried. After recrystallizing 4.71 g of crude product from 20 ml of ethanol under simultaneous clarification with activated carbon 3.39 g (51.8%) of white, crystalline title compound are obtained, m.p.: 116-117 C., 2682-49-7

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of Thiazolidin-2-one, you can also browse my other articles.

Reference£º
Patent; Richter Gedeon Vegyeszeti Gyar RT; US5169859; (1992); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.2682-49-7, name is Thiazolidin-2-one. An updated downstream synthesis route of 2682-49-7 as follows., 2682-49-7

General procedure: A mixture of aminorhodanine (1 mmol), isatin (1 mmol) and 5 muL of acetic acid in 2mL of distilled ethanol was placed in a cylindrical quartz reactor (Phi = 4 cm). The reactor was introducedinto a monomode microwave (Anton Paar) apparatus, for 5 min at100 C and 50 Watts. The crude reaction mixture was allowed tocool down at room temperature and ethanol (10 mL) or mixture of H2O/EtOH (10 mL) was directly added in the cylindrical quartzreactor. The resulting precipitated product was filtered off and waspurified by recrystallization from ethanol if necessary.

A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1438-16-0, you can also browse my other articles.

Reference£º
Article; Khaldoun, Khadidja; Safer, Abdelmounaim; Boukabcha, Nourdine; Dege, Necmi; Ruchaud, Sandrine; Souab, Mohamed; Bach, Stephane; Chouaih, Abdelkader; Saidi-Besbes, Salima; Journal of Molecular Structure; vol. 1192; (2019); p. 82 – 90;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.1438-16-0, name is 3-Aminorhodanine,below Introduce a new synthetic route., 1438-16-0

5908-62-3, A 50 ml flask was charged under nitrogen with 3-bromo-5-nitro-benzoic acid methyl ester (D11) (1 g, 3.8 mmol, 1 equiv), Cs2CO3 (536 mg, 4.4 mmol, 1.2 equiv) tris (DIBENZYLIDENEACETONE) DIPALLADIUM (0) (5 mg, 0.0055 mmol, 0.0154 equiv), Xantphos (10 mg, 0.014 mmol, 0.04 equiv) and toluene (15 ML). Isothiazolidine 1,1-dioxide (D22a) (536 mg, 4.4 mmol, 1.1 equiv) was then added and the resulting mixture was stirred at 90C for 16 hours then cooled to room temperature and diluted with H20 and AcOEt. The layers were separated, the aqueous phase diluted with a saturated aqueous NAHC03 solution and extracted with AcOEt. The combined organic phases were dried over MGS04 and concentrated in vacuo to give 3- (1, 1-DIOXO-116-ISOTHIAZOLIDIN-2-YL)-5-NITRO-BENZOIC acid methyl ester (D15) (187 mg, 16%) as a yellow solid. [M+H+NH3] + = 318.0, RT = 2. 81 min

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.

Reference£º
Patent; GLAXO GROUP LIMITED; WO2004/50619; (2004); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5908-62-3, name is 1,1-Dioxo-isothiazolidine. An updated downstream synthesis route of 5908-62-3 as follows., 5908-62-3

General procedure: To thiazolidine-2-thiones (1.0 equiv.) in THF (5.5 mL/mmol), 60% NaH dispersion in mineral oil (1.2 equiv.)was slowly added at 0 C. The reaction mixture was stirred for 15 min at 0 C before acetyl chloride (1.2 equiv.)was added dropwise. The reaction mixture was stirred for 30 min at 0 C, upon which it was warmed to roomtemperature and allowed to stir for another 2 h. The reaction was quenched with saturated NH4Cl (3 mL/mmol)and the layers were separated. The aq. layer was extracted with EtOAc (2 x 4 mL/mmol) and the combinedorganic layers were dried (Na2SO4),filtered, and concentrated in vacuo. The crude product was purified bycolumn chromatography on silica (hexanes/EtOAc 8:2) to afford the title compounds as yellow oils.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about (S)-4-Phenylthiazolidine-2-thione

Reference£º
Article; Tungen, J¡ãrn E.; Aursnes, Marius; Hansen, Trond Vidar; Tetrahedron Letters; vol. 56; 14; (2015); p. 1843 – 1846;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

185137-29-5, A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.185137-29-5, name is (S)-4-Phenylthiazolidine-2-thione. An updated downstream synthesis route of 185137-29-5 as follows.

General procedure: To a mixture of aldehyde (1.0 mmol), 3-(4-oxo-2-thioxothiazolidin-3-yl)propanoic acid (205 mg,1.0 mmol) or 3-(2-(1H-tetrazol-5-yl)ethyl)-2-thioxothiazolidin-4-one (229 mg, 1.0 mmol) and NaOAc (820 mg, 10.0 mmol) was added acetic acid (5.0 mL). The reaction was allowed to stir at 105 C for 0.5h – 12h, then cooled to room temperature. To the reaction was added water (15mL). The resulting mixture was sonicated to give yellow-orange slurry. After filtration, the solid was washed with water (75 mL) and dried under high vacuum to yield the corresponding product as a red fine powder.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid if you are interested.

Reference£º
Article; Liang, Dongdong; Robinson, Elizabeth; Hom, Kellie; Yu, Wenbo; Nguyen, Nam; Li, Yue; Zong, Qianshou; Wilks, Angela; Xue, Fengtian; Bioorganic and Medicinal Chemistry Letters; vol. 28; 6; (2018); p. 1024 – 1029;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid, introduce a new downstream synthesis route. , 7025-19-6

To a solution of 6-(6-fluoro-4-iodo-2-pyridyl)-5-methyl-2-pyrimidin-2-yl-7,8-dihydro-5H- pyrido[4,3-d]pyrimidine (the product of step 1 in Example 96, 100 mg, 223 muiotaetaomicron) in dioxane ( 3mL) was added isothiazolidine-1,1-dioxide (54.1 mg, 446 muiotaetaomicron), cesium carbonate (145 mg, 446 muetaiotaomicron), Xantphos (25.8 mg, 44.6 muetaiotaomicron) and Pd(OAc)2(5.01 mg, 22.3 muetaiotaomicron). After being heated at 100 C with stirring for 20 hrs under argon, the resulting reaction mixture was then filtered and the filtrate was concentrated in vacuo. The residue was purified by prep-HPLC to give 2-[2-fluoro-6-(5-methyl-2-pyrimidin-2-yl-7,8-dihydro-5H-pyrido[4,3-d]pyrimidin-6-yl)-4- pyridyl]-1,2-thiazolidine-1,1-dioxide (8 mg) as a light yellow solid. 1H NMR (400MHz, DMSO- d6) delta ppm: 8.99 (d, 2H), 8.95 (s, 1H), 7.64 (t, 1H), 6.32 (s, 1H), 6.15 (s, 1H), 5.69-5.64 (m, 1H), 4.47-4.36 (m, 1H), 3.89 – 3.79 (m, 2H), 3.68-3.59(m, 2H), 3.54 – 3.43 (m, 1H), 3.14 – 2.98 (m, 2H), 2.42-2.37 (m, 2H), 1.52 (d, 3H). MS obsd (ESI) [(M+H)+]: 442.

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 5908-62-3, you can also browse my other articles.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; CHENG, Zhanling; HAN, Xingchun; JIANG, Min; WANG, Jianhua; WANG, Yongguang; YANG, Song; (211 pag.)WO2018/1952; (2018); A1;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.5908-62-3, name is 1,1-Dioxo-isothiazolidine. An updated downstream synthesis route of 5908-62-3 as follows., 5908-62-3

General procedure: The suspension of 2-thioxo-1,3-thiazolidin-4-one (0.01 mol) 1a-40a in ethanol (50 mL) was mixed under stirring with a solution of aldehyde (0.011 mol) 1b-40b followed by the addition 3 drops of piperidine under the reflux conditions. The resulting mixture was heated under reflux until complete disappearance of 2-thioxo-1,3-thiazolidin-4-one, TLC control CH3OH – EtOAc 1:9. The reaction mixture was diluted with water (75 mL) and filtrated. The solid residue was recrystallized from a mixture of IPA/DMF.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid

Reference£º
Article; Volynets, Galyna P.; Bdzhola, Volodymyr G.; Golub, Andriy G.; Synyugin, Anatoliy R.; Chekanov, Maksym A.; Kukharenko, Oleksandr P.; Yarmoluk, Sergiy M.; European Journal of Medicinal Chemistry; vol. 61; (2013); p. 104 – 115;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.7025-19-6, name is 3-(4-Oxo-2-thioxothiazolidin-3-yl)propanoic acid. Here is a downstream synthesis route of the compound 7025-19-6. 7025-19-6

To a 500 ml three-necked flask, 38.1 g (0.3 mol) of 2-cyanoimino-1,3-thiazolidine, 82.8 g (0.6 mol) of potassium carbonate, 1.9 g (0.006 mol) of tetrabutylammonium bromide, and Water 220 g followed by the slow dropwise addition of 57.6 g (0.36 mol) of 2-chloro-5-chloromethylpyridine. The duration of the slow addition was 1.5 hours; the reaction was stirred at 60C for 2.5 hours.The reaction was completely detected, stirred and cooled to precipitate a large amount of solids, suction filtration, and cake was taken to obtain 68.8 g of thiacloprid with a purity of 96.5% and a yield of 88.2%; wherein the filtrate obtained by suction filtration (including water and catalyst) was obtained. Tetrabutylammonium bromide) is applied to the next batch of reactions (implementation)Example 6).

Thank you very much for taking the time to read this article. If you are also interested in other aspects of 2-Cyanoimino-1,3-thiazolidine, you can also browse my other articles.

Reference£º
Patent; Shanghai Sheng Nong Biochemical Goods Co., Ltd.; Ye Zhenjun; Geng Li; Fang Yan; Han Haiping; (6 pag.)CN107629045; (2018); A;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.26364-65-8, name is 2-Cyanoimino-1,3-thiazolidine. An updated downstream synthesis route of 26364-65-8 as follows., 26364-65-8

N-t-Butyloxycarbonylglutamine (2.0 g, 8.12 mmol) was dissolved in THF (5 mL) and cooled TO-15C. CAIBE (ISOBUTYLCHLOROFORMATE) (1.06 mL, 8.12 mmol) and 4- METHYLMORPHOLINE (0.895 mL, 8.12 mmol) were added and the solution stirred for 15 min, The formation of the mixed anhydride was checked by TLC (eluent: CHCL3/MEOH : 9/1). After warming to-10C another equivalent of 4-methylmorpholine (0.895 mL, 8.12 mmol) and THIAZOLIDINEHYDROCHLORIDE (1.02 g, 8. 12 mmol) was added. The mixture was brought to room temperature and stirred overnight. The sediment FORMED was filtered off and the solvent was evaporated. The resulting oil was taken up in chloroform (20 ml) and washed with a saturated solution of sodium hydrogensulfate followed by a saturated solution of sodium bicarbonate, water and brine. The organic layer was separated, dried and evaporated. The resulting product was checked for purity by TLC (eluent: CHC13/MEOH : 9/1). Yield: 1.64 g. A portion of this product (640 mg) was dissolved in 3.1 mL ice cold HCl in dioxane (12.98 M, 20 equivalents) and left on ice. The progress of the reaction was monitored by TLC (eluent: CHCL3/MEOH : 9/1). After completion of the reaction the solvent was removed and the resulting residue was taken up in methanol and evaporated again. The resulting oil was dried over phosphorous-V-oxide and triturated twice with diethylether to give the title compound (0.265 g). The purity was checked by HPLC. The identity of the reaction product was checked by NMR analysis.

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about Thiazolidine hydrochloride

Reference£º
Patent; PROSIDION LTD.; WO2005/20983; (2005); A2;,
Thiazolidine – Wikipedia
Thiazolidine – ScienceDirect.com